Document
informations techniques sur les pompes dosrite 2.5
détails sur les spécifications et options des pompes dosrite 2.5

Contenu du document
Dosrite Posing Pumps
Modèle : Dosrite 2.5 - Débit : 2.5 m3/h
Informations Techniques
- Pression de l'eau : 0.2 - 8 bar (2.9 - 116 psi)
- Débit : 10 - 2500 l/h (0.044 - 11 GPM)
- Température de fonctionnement : 4 - 40°C (39.2 - 104°F)
- Raccordement : 3/4"
- * Pieds disponibles sur demande
Options Disponibles
- Manuel ON/OFF
- Hydraulique ON/OFF
- Électrique ON/OFF
Modèles By Pass
Bypass interne et externe avec manchon jaune
Code de Couleur d'Application
- Irrigation - NBR - SST
- Bétail - PO - NBR, EPDM - SST, Hastelloy
- Acides - PVDF - AFLAS - Hastelloy
- Chlore - Viton - Hastelloy
- Industrie - EPDM, AFLAS - SST, Hastelloy
- Lavage de voiture - AFLAS - SST, Hastelloy
- By-Pass - EPDM, AFLAS - SST, Hastelloy
Libération d'Air
- Max : 528 (20.7%)
- Min : 497 (19.5%)
Plage d'application
Gamme de dosage
- 0.2% fixe : 10 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation (1.4 KG)
- 0.8% fixe : 10 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation / Bétail (1.5 KG)
- 1% fixe : 10 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation / Bétail (1.8 KG)
- 0.1% - 0.9% : 10 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Lavage de voiture / Acide (1.8 KG)
- 0.3% - 2% : 10 - 2500 l/h, 0.2 - 8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Lavage de voiture / Industrie / Acide (1.8 KG)
- 0.4% - 4% : 10 - 2500 l/h, 0.2 - 8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Lavage de voiture / Industrie / Acide (1.8 KG)
Bypass interne
- 0.1% - 0.9% : 20 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Acide (1.9 KG)
- 0.3% - 2% : 20 - 2500 l/h, 0.2-8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Acide (1.8 KG)
- 0.4% - 4% : 20 - 2500 l/h, 0.2 - 8 bar, 3/4” BSPT - Applications : Irrigation / Bétail / Chlore / Acide (1.8 KG)
* Débit faible 7 l/h disponible dans le modèle PO
Perte de pression
Taux d'injection maximal par heure selon les différentes gammes de dosage.
Entreprises concernées :
Date d'upload du document :
mercredi 24 septembre 2025