Document
ENG - Linatex Reducers Spec Sheet.pdf
Contenu du document
Linatex ® Slurry Hose Reducers
Technical Specifications
Design Features
•
Available in a large range of sizes and
reduction factors
•
Matched to pump inlet and discharge
internal diameters
•
Superior alignment and vibration
compensation
• Ease of installation
Properties
•
Nominal bores from 50mm (2”)
to 915mm (36”)*
•
Lengths from 300mm (1ft),
customised to requirement**
• Operating temperature
-35°C to +75°C (-31°F to +167°F)
•
May be designed for suction or
discharge applications
•
Available with a broad array of
Linatex ® rubber compounds
Minerals
Applications
To support alignment with the intake
and discharge of pumps for the
transfer of wet slurries in:
• Mineral processing plants
• Acid or alkaline leach circuits
• Oil Sands plants
• Sand and gravel plants
* Custom internal diameters are also available.
** Product specifications are subject to regional variations.
Prolonged performance and reliability
Linatex ® slurry hose reducers are designed to absorb transmitted vibration and noise
between pumps, sumps and associated equipment. They are designed to support
smooth transition of flow between pipework and slurry pump intake and discharge
connections through either eccentric or concentric reducer configurati\
ons.
Internal diameter alignment is critical in achieving prolonged performance and
reliability, and together with our world renowned wear resistant Linatex ® rubber
compounds we aim to provide best-in-field performance at the lowest cost of
ownership. We do this by using the best quality natural rubber and processing it
with leading edge technology. It is our unique, proprietary manufacturing process
that gives Linatex ® premium rubber its extraordinary physical properties and
outstanding performance.
The slurry hose reducer range is custom manufactured to length with in-built fl\
ange
options to bolt directly to pump intake or discharge flange faces. Every aspect of
the reducers’ design may be modified to accommodate the duty at hand, including\
the internal diameter, length, operating pressure, and wear lining compound and
thickness. We are also able to incorporate scuttle ports and flushing points into the
design to support drainage or flushing of the pipeline.
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved. WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Limited. LINATEX, LINARD, LINACURE, LINAGARD and the LINATEX RED COLOUR are trademarks and/or registered trademarks of Linatex Ltd. WMD0150/052017
Weir Minerals
linatex@mail.weir
www.minerals.weir
Wear liner composition is critical to the performance of
your Linatex ® rubber hose. With over 90 years of rubber
manufacturing experience, we have the expertise to
select the best compound for your specified application.
Our superior Linatex ® rubber compounds provide
your application with outstanding wear resistance and
extended wear life. This is designed to achieve the
lowest total cost of ownership for all our hoses.
For more information, please refer to our range of
Linatex ® rubber technical specification sheets.
Entreprise(s) concernée(s) :
Produit(s) concerné(s) :
Date d'upload du document :
jeudi 12 mars 2020